Monthly Archives: July 2011

I have rough cut the shape of the fingerboard and cut the fret slots. Jobs like that used to take me much longer to do but now I have some experience I can just get on with the job without … Continue reading →

I have sanded/scraped the fingerboard down to the final thickness now. I have also set the ramp on the fingerboard to be 7mm thick at fret 1 and  6.2mm at fret 12. I have reduced the thickness of the headstock … Continue reading →

I have glued the headstock section to the neck now. I have always tried to make this cut and glue joint as accurate as I can. This time I have made sure there is plenty of wood to sand away … Continue reading →